1, structural aluminum structure, rubber roller installation, according to the thickness of the sealing plate, using the hoisting motor to rotate through the helical gear, so that the upper beam is adjusted up and down to the substrate, in order to increase the frictional resistance of the guide rail.

2. Grinding head: The grinding wheel is an imported grinding wheel with a grinding belt in the middle. The grinding belt can be changed according to the shape of the grinding head to achieve the purpose of sanding. The grinding wheel and the milling head can be adjusted up and down, front and back, and the angle of rotation to make the surface of the grinding wheel coincide with the surface of the milling cutter.

3. Milling head: It is equipped with two types of dovetail guide rails and rotating angle groove rails, which can be adjusted according to different angles, thicknesses and edge shapes. The milling head motor is a special high speed motor. The user can easily adjust the speed on the frequency modulator according to the material of the plate and the roughness of the milling surface. Tool shape, surface shape, user can choose to order.

4. Hot stamping structure: The mechanism is mainly composed of two hot stamping wheels. There is one heater in the outer heat preservation cover of the hot stamping wheel. Since the hot stamping wheel is often in the state of synchronous rotation of the working table, the heating is uniform. The thermal sensor continuously outputs the temperature of the silicone grinding wheel and displays it on the temperature display. The hot stamping axle has the functions of turning up, down, front and back simultaneously to adapt to the shape of the surface of the milled sheet.

5. Conveyor belt: It consists of double-row, double-pitch chain, track shoe with rubber surface on the back, sprocket and so on. The track is controlled by the speed reducer to move at a predetermined speed.

6. Distribution box button station: It is the hub for all electrical control machine tools to work automatically. The button station has functions such as opening and closing of the conveyor belt, opening and closing of the milling slot, opening and closing of the sand opening, opening and closing of the rolling belt, and opening and closing of the hot stamping wheel. At present, the thermal transfer edge banding machine mainly adopts automatic control, with automatic and manual switch. When the switch is set on the automatic, the machine can work automatically without manual operation.